Functions And Features - Huawei ATN 950B Hardware Description

ATN 950B Multi-service Access Equipment
Hardware Description
The ML1A has two function versions, that is, AND1 and AND2.
between these two versions.
Table 5-20 Differences between the two function versions of the ML1
Function
Matching impedance at an
interface
ATM scheduling mode
ML-PPP scheduling
Number of timeslots
supported by a 64k channel

5.6.2 Functions and Features

The AND1ML1 is a 75-ohm E1 board and the AND1ML1A is a 120-ohm E1 board. The
AND1ML1/ML1A can access a maximum of 16 x E1 signals, supports flexible configuration
of different services on each port, and is hot swappable.
Table 5-21
Table 5-21 Functions and features of the AND1ML1/AND1ML1A
Function and Feature
Basic functions
Interface functions
Fractional E1
PRBS
ATM/IMA
Issue 03 (2012-07-23)
Difference
AND1ML1/AND1ML1A
AND1ML1: 75 ohms
AND1ML1A: 120 ohms
Scheduling by service type
Scheduling with four
priorities
2-31
lists functions and features of the AND1ML1/AND1ML1A .
Remarks
Accesses and processes 16 x E1 signals and supports the ATM
E1, IMA, CES, and ML-PPP protocols.
Supports the hot swappable function.
Supports collection of bandwidth utilization statistics at an
IMA/ML-PPP port.
Supports the CES services at 64 kbit/s level.
Supports the PRBS function in framed or unframed mode of
an E1 port in the receive/transmit direction.
Number of supported IMA
groups
supported ATM E1 services
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Physical Interface Card
Table 5-20 lists the differences
AND2ML1A/
AND2ML1B
AND2ML1A: 75 ohms
AND2ML1B: 120 ohms
Scheduling by connection
Scheduling by CBR, UBR,
UBR+, rt-VBR, or nrt-VBR
connection
Scheduling with eight
priorities
1-31
16
61