Download
Share
Print this page
Threshold Marvale TGT70BK Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Threshold Manuals
  4. Indoor Furnishing
  5. Marvale TGT70BK
  6. Assembly instructions manual

Threshold Marvale TGT70BK Assembly Instructions Manual

Bookcase with drawer
Hide thumbs

Advertisement

Quick Links

Download this manual
Marvale Bookcase with Drawer
Style #: TGT70BK
DPC-item #: 249-14-0069
>> Assembly instructions
TM
© 2023 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Marvale TGT70BK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Threshold Marvale TGT70BK

Summary of Contents for Threshold Marvale TGT70BK

  • Page 1 Marvale Bookcase with Drawer Style #: TGT70BK DPC-item #: 249-14-0069 >> Assembly instructions © 2023 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

  • Page 2: Before You Begin

    Congratulations on your latest Target purchase. Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time. Good luck –...
  • Page 3 hardware (H1) x 28 (H3) x 44 (H2) x 16 (H4) x 8 (H5) x 29 large cam lock small cam lock cam bolt M6 x 30 mm wood dowel M8 x 30 mm wood dowel (H8) x 16 (H9) x 24 (H10) x 8 (H6) x 16 (H7) x 16...
  • Page 4 hardware Spare hardware (H16) x 8 M3.5 x 12mm screw...

  • Page 5: Exploded Diagram

    exploded diagram ITEM DESCRIPTION Top panel Left side panel Right side panel Adjustable shelf Fixed shelf Bottom panel Back panel Upper drawer front panel Lower drawer front panel Drawer back panel Drawer left side panel Drawer right side panel Drawer bottom panel Drawer bottom support Base side frame Base top stretcher...

  • Page 6: How To Use The Cam Lock System

    how to use the cam lock system Push cam into panel - arrow Align cam bolt(s) with cam(s) Screw cam bolt into panel feature on cam top points to and insert all the way into panel edge cross-bored hole(s) 190°-230° Panels should be tight against Rotate cam(s) clockwise each other and connection...
  • Page 7 step 1: attach base upper stretchers NOTE: DO NOT fully tighten all fasteners until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. (H6) x 2 (H7) x 2 1/4”...
  • Page 8 step 2: attach base bottom stretchers NOTE: DO NOT fully tighten all fasteners until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. (H6) x 2 (H7) x 2 1/4”...
  • Page 9 step 3: attach base side frame NOTE: DO NOT fully tighten all fasteners until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. (H6) x 4 (H7) x 4 1/4”...
  • Page 10 step 4: prepare drawer kit assembly (H3) x 16 cam bolt 4.1. Securely screw the cam bolts (H3) into the designated small holes on the drawer front panels (H and I).
  • Page 11 step 5: attach drawer side panels to the drawer back panel NOTE: DO NOT use power tools. The grooves line up with each other. (H4) x 4 M6 x 30 mm wood dowel (H9) x 8 M4 x 32mm screw 5.1.
  • Page 12 step 6: attach drawer bottom supports NOTE: DO NOT use power tools. The cam lock holes face outward. (H9) x 8 M4 x 32mm screw 6.1. Orient and fasten two drawer bottom supports (N) to the drawer back panel (J) with four 32mm screws (H9). 6.2.
  • Page 13 step 7: install drawer bottom panels 7.1. Slide the drawer bottom panels (M) into the grooves on the drawer side panels (K and L) until fully inserted into the drawer back panels (J).
  • Page 14 step 8: attach the drawer front panels (H2) x 16 (H4) x 4 small cam lock M6 x 30 mm wood dowel 8.1. Insert one small wood dowel (H4) into the inner hole on each drawer side panel (K and L). 8.2.
  • Page 15 step 9: install the drawer handle (H11) x 2 (H12) x 4 handle M4 x 18mm bolt 9.1. Orient and attach the handle (H11) to the front side of each drawer front panel (H and I) with two 18mm bolts.
  • Page 16 step 10: attach panel reinforcements NOTE: DO NOT use power tools. (H9) x 8 M4 x 32mm screw The countersunk holes face upward. 10.1. Orient and fasten one panel reinforcement (R) to the top panel (A) with four 32mm screws (H9), using the pilot holes as a guide. 10.2.
  • Page 17 step 11: prepare top panel and fixed shelf assembly (H3) x 16 cam bolt 11.1. Securely screw the cam bolts into the designated small holes on the top panel (A) and bottom panel (F).
  • Page 18 step 12: prepare side panel assembly (H3) x 12 cam bolt 12.1. Securely screw the cam bolts (H3) into the designated small holes on both side panels (B and C).
  • Page 19 step 13: attach fixed shelf (H1) x 2 (H5) x 2 large cam lock M8 x 30 mm wood dowel The reinforcement faces downward and is located at front of the unit. 13.1. Insert two large wood dowels (H5) into the left inner holes on the fixed shelf (E) and attach it to the left side panel (B) by engaging two large cam locks (H1) as shown.
  • Page 20 step 14: attach one back panel The cam locks face outward. (H1) x 4 (H5) x 3 large cam lock M8 x 30 mm wood dowel 14.1. Attach one back panel (G) to the left side panel (B) using four cam locks (H1) and three large wood dowels (H5).
  • Page 21 step 15: attach the other back panel The cam lock housing face upward. (H5) x 3 M8 x 30 mm wood dowel 15.1. Orient and attach the other back panel (G) to the assembled back panel (G) with three large wood dowels (H5).
  • Page 22 step 16: attach right side panel (H1) x 6 (H5) x 5 large cam lock M8 x 30 mm wood dowel 16.1. Insert five wood dowels (H5) into the inners holes on the right side panel (C) and attach it to the fixed shelf (E) and back panel (G) by engaging six large cam locks (H1).
  • Page 23 step 17: attach top panel (H1) x 4 (H5) x 8 large cam lock M8 x 30 mm wood dowel 17.1. Insert eight wood dowels (H5) into the inner holes on both side panels (B and C) and the back panels (G). 17.2.
  • Page 24 step 18: attach bottom panel (H1) x 4 (H5) x 8 large cam lock M8 x 30 mm wood dowel 18.1. Repeat the same process to attach the bottom panel (F) to the previous assembly.
  • Page 25 step 19: fasten top and bottom panel to the side panels (H1) x 8 large cam lock 19.1. Ask for assistance to turn the assembled unit on its back edges. 19.2. Fasten the top panel (A) and bottom panel (F) to the side panels (B and C) with eight cam locks (H1).
  • Page 26 step 20: attach the base assembly NOTE: DO NOT fully tighten all cam locks and screws until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. (H6) x 8 (H7) x 8 1/4 x 15mm bolt lock washer...
  • Page 27 step 21: install the adjustable shelves and put the cam lock covers CAUTION: Heavy! You may need assistance with this step. (H10) x 8 (H13) x 4 shelf support cam lock cover (H16) x 8 M3.5 x 12mm screw 21.1. Ask for assistance to lift the assembled unit upright and position it near the final location. 21.2.
  • Page 28 step 22: install the drawers Ball bearing cart Front Front Ball bearing cart Drawer installation 22.1. To insert the assembled drawers into the frame, extend the ball bearing slide tracks on the unit all the way forward (including ball bearing cart). Then align the slide runners on the assembled drawers with the slide tracks and push the drawer carefully inside until it stops.
  • Page 29 step 23: attach tipping restraint hardware Wooden stud Wall Short screw Nylon strap Wall (H15) x 2 tipping restraint hardware kit (inside plastic bag) Floor leveler Metal bracket Long screw Tools required: Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8” drill bit. 23.1.
  • Page 30 FURNITURE TIPPING RESTRAINT YOUNG CHILDREN MAY BE INJURED BY TIPPING FURNITURE AND YOU MUST USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO THE WALL, TO PREVENT ACCIDENTS AND/OR INJURIES. TO PROVIDE PROTECTION AGAINST THE UNEXPECTED TIPPING OF FURNITURE DUE TO IMPROPER USE. USE OF TIP-OVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE, THE RISK OF TIP-OVER.

  • Page 31: Care And Maintenance

    Care and Maintenance · Use a soft, clean cloth that will not scratch the surface when dusting. · Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. · Using solvents of any kind on your furniture may damage the finish. ·...
  • Page 32 M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Marvale Bookcase with Drawer MODEL # TGT70BK MAXIMUM LOAD 22.7 kg / 50 lb MAXIMUM LOAD 9.1 kg / 20 lb THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM WEIGHTS INDICATED.
  • Page 33 The maximum recommended weight allowance is 22.7 kg / 50 lb for the top panel and shelves. The maximum recommended weight allowance is 9.1 kg / 20 lb for the drawers. Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result may tip over onto the child.

This manual is also suitable for:

249-14-0069