Related Manuals for Threshold TGTSFC-2
Summary of Contents for Threshold TGTSFC-2
- Page 1 Hidden Hills Mixed Material Console Table - Brown Style # TGTSFC-2 DPC-item # 249-17-0525 >> Assembly instructions © 2020 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
-
Page 2: Before You Begin
Congratulations on your latest Target purchase. Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time. Good luck –... - Page 3 WARNING Children have died from furniture tipover. To reduce the risk of furniture tipover: ALWAYS install tipover restraint provided. ⚫ NEVER put a TV on this product. ⚫ NEVER allow children to stand, climb or hang ⚫ on drawers, doors, or shelves. NEVER open more than one drawer at a time.
- Page 4 hardware (H1) x 10 (H2) x 12 (H3) x 12 (H4) x 1 (H5) x 2 1/4” x 12 mm bolt 1/4” x 40 mm bolt flat washer hex wrench tipping restraint hardware kit (inside plastic bag) Spare hardware...
-
Page 5: Exploded Diagram
exploded diagram ITEM DESCRIPTION Top panel Top stretcher Left side frame Right side frame Bottom stretcher... - Page 6 step 1: Attach the top stretchers to the left side frame NOTE: DO NOT fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. (H1) x 4 (H4) x 1 1/4”...
- Page 7 step 2: Attach the bottom stretcher and the right side frame NOTE: DO NOT fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. (H1) x 6 (H4) x 1 1/4”...
- Page 8 step 3: Attach previous assembly to the top panel NOTE: DO NOT fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. (H2) x 12 (H3) x 12 1/4”...
- Page 9 step 4: Attach tip-over restraint hardware kit Wooden stud Wall Nylon strap Short screw Wall (H5) x 2 tipping restraint hardware kit (inside plastic bag) Floor leveler Long screw Metal bracket Tools required: Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8” drill bit. 4.1.
-
Page 10: Care And Maintenance
Care and Maintenance • Use a soft, clean cloth that will not scratch the surface when dusting. • Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. • Using solvents of any kind on your furniture may damage the finish. •... - Page 11 The maximum recommended weight allowance is 90.7 kg / 200 lb for top. Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result may tip over onto the child. NEVER allow children to climb or play with the TV or furnishing supporting the TV.
Need help?
Do you have a question about the TGTSFC-2 and is the answer not in the manual?
Questions and answers