Subscribe to Our Youtube Channel
Related Manuals for Threshold TGTD42-3
Summary of Contents for Threshold TGTD42-3
- Page 1 Conway Console Table Style # TGTD42-3 DPC-item # 249-17-2888 >> Assembly instructions © 2021 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
-
Page 2: Before You Begin
Congratulations on your latest Target purchase. Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time. Good luck –... - Page 3 hardware (H1) x 16 (H2) x 1 (H3) x 2 1/4” x 15 mm bolt hex wrench tipping restraint hardware kit (inside plastic bag) Spare hardware...
- Page 4 exploded diagram ITEM DESCRIPTION Top panel Left side frame Back support Middle shelf Base Right side frame...
- Page 5 step 1: attach the side frames NOTE: DO NOT fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. (H1) x 4 (H2) x 1 1/4”...
- Page 6 step 2: attach the top panel NOTE: DO NOT fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. (H1) x 4 (H2) x 1 1/4”...
- Page 7 step 3: attach the back support NOTE: DO NOT fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. (H1) x 4 (H2) x 1 1/4”...
- Page 8 step 4: attach the middle shelf NOTE: DO NOT fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. (H1) x 4 (H2) x 1 1/4”...
- Page 9 step 5: attach tip-over restraint Wooden stud Wall Nylon strap Short screw Wall (H3) x 2 tipping restraint hardware kit (inside plastic bag) Metal bracket Long screw Tools required: Phillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8” drill bit (not provided). 5.1.
-
Page 10: Care And Maintenance
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. ... - Page 11 M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Conway Console Table MODEL # TGTD42-3 MAXIMUM LOAD 45.4 kg / 100 lb MAXIMUM LOAD 22.7 kg / 50 lb THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM WEIGHTS INDICATED.
- Page 12 The maximum recommended weight allowance is 45.4 kg / 100 lb for top panel. The maximum recommended weight allowance is 22.7 kg / 50 lb for shelves. Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result may tip over onto the child.
- Page 13 FURNITURE TIPPING RESTRAINT YOUNG CHILDREN MAY BE INJURED BY TIPPING FURNITURE AND YOU MUST USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO THE WALL, TO PREVENT ACCIDENTS AND/OR INJURIES. TO PROVIDE PROTECTION AGAINST THE UNEXPECTED TIPPING OF FURNITURE DUE TO IMPROPER USE. USE OF TIP-OVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE, THE RISK OF TIP-OVER.
Need help?
Do you have a question about the TGTD42-3 and is the answer not in the manual?
Questions and answers