Table of Contents
Advertisement
Operational Reference
Using CamExpert with Genie Nano-10G Cameras
The Sapera CamExpert tool is the interfacing tool for GigE Vision cameras and is supported by the Sapera library
and hardware. CamExpert allows a user to test camera settings and functions. Additionally, CamExpert saves the
Nano-10G user settings configuration to the camera or saves multiple configurations as individual camera
parameter files on the host system (*.ccf).
An important component of CamExpert is its live acquisition display window, which allows immediate verification
of timing or control parameters without the need to run a separate acquisition program.
CamExpert Panes
The various areas of the CamExpert tool are described in the summary figure below. The categories and
parameters (features) supported by the device are shown in the Parameters pane. The number of parameters
shown is dependent on the View mode selected (Beginner, Expert, Guru – see below).
Operational Reference • 27
Nano-10G Series GigE Vision Cameras
Advertisement
Table of Contents
