Clearance Dimensions - Fisher & Paykel CG905DW Installation Manual

I
C
A
B
ISO

CLEARANCE DIMENSIONS

A Minimum clearance from left edge of cutout to nearest combustible surface
B Minimum clearance from right edge of cutout to nearest combustible surface
C Minimum clearance from rear edge of cutout to:
Nearest combustible surface
Nearest non-combustible surface
D Minimum height of non-combustible material when used on adjacent walls
E Minimum clearance from cooktop surface to:
Rangehood
Any other overhead exhaust fan
Downward facing combustible surface
Downwards-facing tiled or fire resistant surface
F Minimum clearance below top of benchtop to:
Combustible surface
Fisher & paykel oven or nearest non-combustible surface
G
Minimum distance from right edge of cooktop to gas connection point on wall (if using a flexible hose)
H Distance from floor to gas connection point on wall (if using a flexible hose)
I Maximum overall depth of overhead cabinetry
J Minimum cleance from the cooktop surface to overhead cabinetry
Note: Ensure there is an earthed power outlet within 900 mm of the centre rear of the product. The gas connector on the wall should be 800-850 mm (H) above the floor and to a distance of at least 250 mm (G) outside
the width of the product, on the right-hand side. It should be accessible with the product installed.
5
CLEARANCE DIMENSIONS
E
J
F
G
FRONT
min. 800 - max. 900
D
H
mm
100
100
115
35
150
650
800
650
500
81
81
250
600
366
6