Clearance Dimensions - Fisher & Paykel CI304PTX Installation Manual

F
B
I
C
8
CLEARANCE DIMENSIONS — 30" MODEL
G
A F
D E
J
H
C
Combustible surface
Any materials of a building structure or decorative structure made of wood, compressed paper,
plant fibres, vinyl/plastic or other materials that are capable of transferring heat or being
ignited and burned. Such material shall be considered combustible even though flame-proofed,
fire-retardant treated or surface-painted, or plastered.

CLEARANCE DIMENSIONS

A Minimum clearance from glass surface to:
Unprotected overhead cabinet centered above cooktop*†
z
Protected overhead cabinet centered above cooktop*†
z
Range hood**
z
B Minimum clearance below top of countertop to top of any
appliance, companion product or obstruction below cooktop***
C Minimum clearance from side edges of cutout to nearest
combustible surface
D Maximum distance from right edge of cutout to center
of junction box
E Minimum clearance below top of countertop to junction box
F Minimum clearance from countertop to overhead cabinet
(not directly above the cooktop)
G Minimum distance between overhead cabinets
(centered above cooktop)
H Minimum clearance from rear edge of cutout to nearest
combustible surface
Distance from rear edge of cooktop to nearest combustible
surface (not shown)
I Minimum clearance from front edge of cutout to front edge
of counter
J Maximum depth of overhead cabinetry
*To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space
located above the surface units should be avoided. If cabinet storage is to be provided, the risk can
be reduced by installing a range hood that projects horizontally a minimum of 5" (127mm) beyond the
bottom of the cabinets.
† = 30" (762mm) minimum clearance between the top of the cooking surface and the bottom of an
A
unprotected wood or metal cabinet; or
A
cabinet is protected by not less than ¼"-thick flame-retardant millboard covered with not less than
No. 28 MSG sheet steel, 0.015"-thick stainless steel, 0.024"-thick aluminum, or 0.020"-thick copper.
**Refer to your range hood installation guide for further details on clearances.
***Clearance stated is for proud installation of the cooktop. For flush installations, the height of the
cooktop glass should be added to the clearance.
25 5/8
3 3/8
1 3/16
23 1/2
29 15/16
= 24" (610mm) minimum when bottom of wood or metal
CI304PTX
IN MM
30 762
24 610
650
85
30
30 762
9 230
450
760
1 1/2 39
1/2 13
1 3/8 35
13 330