Fisher & Paykel CG905DW Installation Manual page 4

When you install the appliance
As servicing requires removing of the cooktop from the
●
countertop we do not recommend flush mounting. To
the fullest extent permissible by law, the owner carries
all risk for flush mounting of the cooktop. The owner
must ensure the cooktop has been cut out from the
benchtop before servicing can be carried out. Fisher &
Paykel will not be liable for any costs associated with
removing or replacing a flush-mounted and/or sealed-
in product, nor for repairing any damage that may be
incurred by doing this. Fisher & Paykel does not exclude
any statutory liability it may have and which by law
cannot be excluded, because of the giving of this notice.
If installed with an approved flexible hose, the hose
●
should not come in contact with the bottom of the
appliance or any sharp edges. Flexible hose assemblies
should be BS 699.1 certified.
Seal exposed bare edges of the cutout with an oil-
●
based paint or moisture-proof polyurethane to prevent
possible moisture creeping between the cooktop trim
and the benchtop.
When you install the appliance
If, after following the instructions given, correct
●
performance cannot be achieved, please contact your
nearest Fisher & Paykel Authorised Service Centre,
Customer Care, or contact us through our website listed
at the end of this document.
3
1
SAFETY AND WARNINGS