Download Print this page
Vivo STAND-TV65B Instruction Manual
Vivo STAND-TV65B Instruction Manual

Vivo STAND-TV65B Instruction Manual

Black easel studio tv stand

Advertisement

Quick Links

Black Easel Studio TV Stand
Instruction Manual
SKU: STAND-TV65B
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-tv65b
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303

Advertisement

loading
Need help?

Need help?

Do you have a question about the STAND-TV65B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vivo STAND-TV65B

  • Page 1 Black Easel Studio TV Stand Instruction Manual SKU: STAND-TV65B Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv65b GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
  • Page 2: Package Contents

    WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
  • Page 3: Tools Needed

    TOOLS NEEDED Phillips Level Pencil Drill Tape Measure Screwdriver ASSEMBLY STEPS STEP 1 Remove the cable management cover from Center Leg (B). Assemble Center Leg (B) to Pole (E) using M5x12mm Screws (S-A) and a Phillips screwdriver. Screw Legs (A) into base of Pole (E). STEP 2 Adjust collar height on Pole (E) using 4mm Allen Wrench (T-B).
  • Page 4 STEP 3 Remove the screw from the center clamp of Lower VESA Bracket (C) and open the clamp. STEP 4 OPTION A: Flat Back Monitor Position Lower VESA Bracket (C) and Upper VESA Bracket (D) horizontally on the back of the TV, making sure Upper VESA Bracket (D) is on top and Lower VESA Bracket (C) is below.
  • Page 5 STEP 4 (Continued) OPTION B: Large or Curved Back Monitor Position Lower VESA Bracket (C) and Upper VESA Bracket (D) horizontally on the back of the TV, making sure Upper VESA Bracket (D) is on top and Lower VESA Bracket (C) is below. Secure using Screws (M-C, M-D or M-E) with Square Washers (M-F) and Spacers (M-G, M-H) with Security Clips (G) installed to top holes.
  • Page 6 STEP 7 OPTION A: Wood Stud Installation Use a stud finder and a level to locate two adjacent studs. Using Cable Clamps (F) as guides, mark drilling locations on the wall. Drill a 1.6” (40mm) deep hole using a 1/8” (3.5mm) drill bit. Mount Cable Clamps (F) to wall using ST4.8x38mm Screws (S-B).
  • Page 7 STEP 7 (Continued) OPTION B: Concrete/ Brick Installation Using Cable Clamps (F) as guides, mark drilling locations on wall. Drill holes at least 1.6” (40mm) deep using a 9/32” (7mm) drill bit. Insert Concrete Anchors (S-C) in holes and mount Cable Clamps (F) to the wall using ST4.8x38mm Screws (S-B).
  • Page 8 : 1HR 8M (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...