Power Supply - Renesas RX200 Series User Manual

Renesas RX Family

4.6.2 Power Supply

There are three ways to supply power to the CPU board and inverter board, and the power supply for the
communication board is independent of the CPU board and inverter board and is supplied at 5V from the
USB connector.
(1) From DC jack
Use an AC adapter or something similar to supply power from the DC jack (J1) on the inverter board. The
compatible plug has an outer diameter of 5.5 mm, an inner diameter of 2.1 mm, and a polarity of center positive.
The input voltage range is 12 to 48V.
(2) From terminal block
Supply power from the terminal block (CN1) of the inverter board using a DC stabilized power supply or the
like. The polarity should follow the silk indication ("+", "-") on the board. The input voltage range is 12 to 48V.
R12UZ0111EJ0100 Rev 1.00
November 15, 2022
Figure 4-10 Power supply from DC jack
Figure 4-11 Power supply from terminal block
MCK-RX26T User's Manual
12～48V
12～48V
Page 18 of 38