Hardware Setup; Board Connection - Renesas RX200 Series User Manual

Renesas RX Family MCK-RX26T User's Manual

4.6 Hardware Setup

4.6.1 Board Connection

When using this product for motor control evaluation, connect the boards as shown in Figure 4-9. Note that
the connector between the CPU board and the inverter board is a tight fit, so be careful not to bend the pins
when connecting or disconnecting.
Please refer to 4.6.2 for the power supply method. In Figure 4-9 the power is supplied from the AC adapter.
The RX26T CPU board supports a maximum of two-motor control and can be connected as shown in Figure
6-2 shown later, if you prepare an additional inverter board and motor.
Motor
CPU board
PC
Inverter board
USB cable
AC adaptor
Communication
cable
Figure 4-9 Board connection
R12UZ0111EJ0100 Rev 1.00 Page 17 of 38
November 15, 2022