Hardware Specification; Epaper Display Panel; Lithium-Ion Battery Pack - Advantech EPD-660 User Manual

2.1

Hardware Specification

EPD-660 and EPD-662 are directly designed for end users to mount on the wall.
EPD-660 and EPD-662 devices include an ePaper display panel, control board,
housing, battery, and an optional mounting bracket.
2.1.1

ePaper Display Panel

Panel Size: 285.8 x 213.65 mm

Panel PN:

1. 968AD00388 Operation temperature range: 0 °C to +50 °C for Black and White.
2. 968DD00200 Operation temperature range: 0 °C to +40 °C for Red, Black and
White.
Panel inspection criteria refers to E Ink CAS & Inspection standard document.

Note! E Ink Recommend condition for storage:



2.1.2

Lithium-Ion Battery Pack

Optimal method of charging the battery:

1. We suggest to STOP charging the battery after you see the battery 90% ICON.
Charging the battery after it has fully charged will damage the battery.
2. We suggest that battery must be recharged if you see 15% or lower, low power
ICON on the EPD device to avoid power-drain and damaging the battery.
SW mechanism to alarm low power:

1. When a 15% low battery ICON displays, the EPD device will not allow OTA con-
nection.
2. When the battery is under 3%, the EPD device is forced to shut down and won't
wake up in order to avoid over power consumption.
Note! When customers first receive a sample, the battery will be fully charged
(100%). DO NOT CHARGE the battery at this time. We suggest custom-
ers use the sample for a while and charge the battery when it is well
below 50% (See # 1 above).
EPD-660, EPD-662 Board User Manual
Temperature: 20 +-10 °C.
Humidity: 60% RH+-10%RH, Non-condensing.
The following diagram demonstrates how to mount EPD-660 on the
wall, and the components required.
8