Table of Contents
Advertisement
3 Installation
This section refers to mechanical and electrical installation, so it is reserved for the aircraft
manufacturer (paramotor, hang glider, ultralight and others) who has qualified personnel in the
mechanical, electrical and aeronautical fields. By following the instructions, it will be possible to
assemble the engine correctly.
Please refer further to the aircraft manual for operation, installation, maintenance. A correct and
safe operation of the same engine, cannot be guaranteed in other applications, than those
approved by the aircraft manufacturer.
Any procedure of installation, maintenance and/or repair of the products must be carried out
exclusively with the original Vittorazi parts and tools specified by Vittorazi, in compliance with the
specifications contained in the user, installation and/or maintenance manual of the products; to
ensure maximum safety and performance of the products, the above-mentioned procedures will
be carried out by mechanics with proven experience in the Ultralight aviation or general aviation
or with experience gained by Vittorazi professional training courses. Failure to do so, will held
harmless the company from any liability for any damage due to the malfunctioning and
immediately void the warranty of the product.
Vittorazi shall not be liable for any damages deriving from the installation of its motors onto
aircraft and/or equipment that require airworthiness certifications.
Frame design must give strong consideration to the following sections: 3.2 Supports to the frame,
3.3 Electrical system, 3.4 Fuel system, 3.5 Cooling system. It is also recommended to carry out the
checks described in the relevant paragraph (3.12 Final checks) before starting the engine.
Cosmos 300 - Installation manual - V3
8
Advertisement
Table of Contents
