Table of Contents
Advertisement
Position the ignition coils on the chassis, away from heat sources and, if possible, on a flat surface
with rubber in between to reduce transmitted vibration. Before attaching the ignition coils,
ensure that the cables are of adequate length even when the engine vibrates and shifts due to
acceleration. Check that the connectors are securely locked and offer good cable tensile strength.
Iron core of secondary coil must be at earth potential.
1
Primary coil
2
Secondary coil
3
Voltage regulator
4
CDI
5
Fixing plate
Cosmos 300 - Installation manual - V3
31
Advertisement
Table of Contents
