For complete assembly of the radiator, carry out the following steps:
•
Connect the 2 vibration dampers (5) to the upper bracket (4).
•
Place 2 washers 10x28x2,5 (2) under the vibration dampers (5).
•
Place 2 washers 5x28x2,5 (1) on top of the vibration dampers (5).
•
Insert 2 Allen screws M5x20 (3) and tighten.
•
Connect the 2 vibration dampers (5) to the lower bracket (4).
•
Place 2 washers 10x28x2,5 (2) between the vibration dampers (5) and the radiator.
•
Place 2 washers 5x28x2,5 (1) under the vibration dampers (5).
•
Insert 2 Allen screws M5x16 (3) and tighten.
Cosmos 300 - Installation manual - V3
42