Table of Contents
Advertisement
Then proceed to fasten the 2 cables coming out of the elbows to the carburettor. The connection
points are shown in the figure.
Secure the cable using 2 nipples to prevent loosening.
Check carefully:
•
the Bowden cable is secured in the screw nipple;
•
the full opening of the shutter;
•
the sliding of the system;
•
the return to the stop position each time the throttle is released.
All of these controls should be performed without the airbox to visually check operations.
The checks will be repeated again even with the airbox installed.
Cosmos 300 - Installation manual - V3
53
Advertisement
Table of Contents
