Messages On The Voice Terminal Or The Attached Data Terminal Displays - AT&T 7506 User Manual

Messages on the Voice Terminal or the Attached Data
Terminal Displays
This section describes various messages that may appear on your 7506 or 7507 display or your
attached data terminal.
CONTINUE may appear when dialing a call or a particular feature access code. At this
point, additional digits may be required to complete the call. For further
information, call your system administrator.
DENIED, DTR is displayed if you try to initiate a data call via
IS OFF indication is off. See the DTR section in Chapter 4, ''Data Options and
Profiles,'' for more information.
DIAL is displayed when call origination is performed via
LINK DOWN is displayed when you try to initiate a data call when a signaling link
cannot be established to the network. For more information, see your
system administrator.
INCOMING is displayed if you have an incoming call. In CMD Local Mode, this
DATA CALL message and possibly additional information about the incoming call will
be displayed prior to a CONNECT message. For example, an incoming
internal automatically answered circuit switched data call from telephone
number 908-555-2222 may appear as follows on the display of your data
terminal.
The following may appear if the call is forwarded.
6-6 Technical Information
INCOMING DATA CALL
9085552222
CONNECT
DATA MODE
INCOMING DATA CALL
9085552222 TO 9085553333
CONNECT
DATA MODE
while the DTR
DATA
.
DATA