Table of Contents
Advertisement
Self-Test
The self-test can be used to reset the data options in the Active profile. Unlike the Data ZAP
command (see Use of the Data ZAP Command to Clear a Lock-up ADM in Chapter 7,
''Troubleshooting''), which resets the options to factory default values, the self-test resets all the
data options in the Active profile to their power-up (P1) values without unplugging the ADM.
The self-test also loads the power-up values for the profile independent data options (speed,
parity, and local mode) and the unstored data options (local.cr local.lf, and local.erase).
Activation of the self-test will terminate any voice or data calls in progress.
The procedure for self-test is described in the appropriate User's Manual as follows,
ISDN 7505 Modular Terminal and ISDN 7506 Display Terminal User's Manual,
555-021-731
ISDN 7507 Display Terminal User's Manual, 555-021-732
Standard ISDN-1 7506 and 7507 Display Terminal User's Manual,
555-021-734.
Testing
5-3
Advertisement
Table of Contents
