Table of Contents
Advertisement
Press
2
DATA/SEND/OFF
Follow the instructions on the set's display as described below.
Press
to view the options or
3
#
If you are viewing the options, press
all the options. Press * to quit once you have viewed the options. (When viewing
the options, the currently active values are displayed.)
If you are changing options, press * to change the currently displayed option value
until the desired value is displayed, press
the next option without making a change. (When changing the options, the values
initially displayed are the power-up values. These values may not be the same as the
currently active values.)
After you have made your last selection, the ISDN set stores and activates your
selections and automatically exits the program mode.
* If you are upgrading an ISDN 7505 terminal (without display), refer to the Integrated Services Digital Network
(ISDN) Terminal Installation and Test Manual , 555-021-101.
2-4
Getting Started
. No additional lamps come on.
* to change any of the options.
#
to continue stepping through the display of
to save the value. Press
#
to skip to
0
Advertisement
Table of Contents
