Table of Contents
Advertisement
8 The ADM prompts:
Do you want to activate this profile now (Y or N)?
Type y to activate p1.
The ADM responds:
p1 copied to pA
Type n to not activate p1.
The ADM responds:
p1 not copied to pA
Setting Options: Changing Your Active Profile, pA
To change the option values in the active profile (pA), use the set command. The program
command cannot be used to change options in pA.
To change an option value in pA, at the CMD: prompt type:
set option to value
For example:
set echo
set text
Note:
Values in pA are not automatically stored. Unless you only want to temporarily change
options, it is important to save any changes by copying pA to one of the stored profiles.
In the event of a power failure, pA values are overwritten by values in p1.
To store pA, at the CMD: prompt type:
copy pA to p1
or, for example,
copy pA to p4
Note:
In all of the above procedures, the word ''to'' is optional. Examples of the command
without ''to'' are:
set echo on
set text diagnostic
4-20
Data Options and Profiles
Advertisement
Table of Contents
