Table of Contents
Advertisement
Viewing an Option Profile
To display the option values for any profile, use the view command. Type view to display the
values of the active profile. Type view p1 to display the values of stored profile p1. Replace
p1 with p2, p3, p4, or p0 in the view command to display their values.
Note:
Remember that you can display the options on your data terminal screen and change
them whenever you are in local mode (that is, not transmitting data). To suspend data
mode and enter local mode, rapidly type the Attention sequence: +++. The system
displays the CMD: prompt.
Viewing Individual Option Values Within the Active Profile, pA
You can also use the view command to check the value of an option within the active profile.
For example, to check the value of parity, type view parity . Both the current and possible
values are displayed on your data screen, for example:
current value = even
possible values = even
4-22
Data Options and Profiles
mark
odd
space
Advertisement
Table of Contents
