Table of Contents
Advertisement
S-Registers
The S-registers provide a means of changing or reading selected ADM options. In most cases,
the values defined for the S-registers listed in Table 3-3 are acceptable. However, if the values
are not acceptable, use the information below to change the values.
To view the value of a particular S-register, type ats n?, and
the register you want).
The value of the S-register n can be changed by typing ats n=value
Register
S0
S1
S2
S3
S4
S5
S11 & S88
All others
TABLE 3-3
S-Registers
S-Register Table
Description
Controls the
Answer option
-
ASCII value of the
Attention
sequence
Defines carriage
return
Defines line feed
character
Defines backspace
character
RETURN
Default
000
001
-
043 (+++)
013 (carriage
return)
010 (line feed)
008 (backspace)
Using the CMD and AT Commands
(where the value of n is
.
RETURN
Comments
0 = manual
1 = auto
not used
decimal value of
ASCII character
used for Attention
sequence
decimal value of
ASCII character;
used to end
command line and
to end result code
decimal value of
ASCII character;
used after carriage
return only when
verbal result codes
are enabled (see
atvn command in
Table 3-2)
decimal value of
ASCII character
used as backspace
see API manual
return zeros when
read; value set is
ignored
3-11
Advertisement
Table of Contents
