Table of Contents
Advertisement
Type help command to get a brief description of how to use the command or a brief
3
description of the options available with the command:
CMD: help end
The ADM responds:
Type END to end a data call in progress.
Abbreviating CMD Commands
You can abbreviate command names. You need only type the ''unique'' part of the name (see
Table 3-1). For example, dial becomes d, and continue becomes con. You can abbreviate
option names in the same way.
Suspending and Continuing Data Transmission
Once a data call has been established, you can suspend transmission and return to local mode so
you can ''talk'' directly to the ADM. The procedure below explains how to do this.
Rapidly type the attention sequence: +++ . (If you pause between keystrokes, the ADM will
send the + characters as end-to-end data.)
data transmission has been suspended; you can now issue commands to the ADM, using the
commands explained in this chapter.
To exit the Local Mode and return to Data Mode:
At the CMD: prompt, type continue , followed by
(To change the Attention sequence, see Chapter 4, ''Data Options and Profiles.'')
Changing Between CMD Local Mode and Data Mode During a Data Call
3-4
Using the CMD and AT Commands
CMD: appears on your screen. This means that
+++
CMD
Local
Mode
Continue
FIGURE 3-1
.
RETURN
Data
Mode
Advertisement
Table of Contents
