Table of Contents
Advertisement
To use the option settings in a stored profile like p2, you must activate them; at the CMD:
prompt, type:
copy p2 to pA
The system responds:
pA updated
To replace one stored profile with another, copy the replacement profile to the replaced profile;
for example, type:
copy p2 to p1
The above command copies the values of p2 into p1 so they are identical.
Table 4-2 summarizes the information that is described in detail in the following sections.
Profile
Use
Active
Settings used
Profile,
for data calls
pA
p0
Stored Data Profile
(Factory Profile)
p1
Stored Data Profile
(Copied to pA
after self-test or
power failure)
p2
Stored Data Profile
p3
Stored Data Profile
p4
Stored Data Profile
4-18
Data Options and Profiles
TABLE 4-2
Data Option Profiles
To view, type:
To edit, type:
view
set option value
or view pA
(e.g., set parity even)
To Store:
copy pA to p1
view p0
Factory Profile
(Cannot be changed)
view p1
program p1
view p2
program p2
view p3
program p3
view p4
program p4
To activate, type
(Activated for
next data call)
copy p0 to pA
copy p1 to pA
copy p2 to pA
copy p3 to pA
copy p4 to pA
Advertisement
Table of Contents
