Table of Contents
Advertisement
Dialing a Voice Call
To dial a voice call from your PC or terminal keyboard, type:
atdp 5552222 and press
are calling.
Depending on your ISDN set's configuration, the ADM may automatically turn on its
speakerphone/loudspeaker while the voice call is being dialed, after the call has been dialed,
or not at all. To configure your ISDN set for your preferred method of operation, follow the
steps below.
Setting Voice Call Progress on the 7506 or 7507 Display Terminals*
Note:
The handset must be in the cradle and the speakerphone/loudspeaker must be off to set
options on the keypad.
Press
. The green lamp comes on.
1
Select
Note:
This button may be labeled
Press
.
2
Speaker
Follow the instructions on the set's display.
* to select one of the following options: Immediate Call Progress, Delayed
Press
3
Call Progress, or Call Progress Disabled. Press
* If you are upgrading an ISDN 7505 terminal (without display), refer to the Integrated Services Digital Network
(ISDN) Terminal Installation and Test Manual , 555-021-101.
3-12
Using the CMD and AT Commands
where 5552222 is the telephone number you
RETURN
on older sets.
Shift/Select
to save your selection.
#
Advertisement
Table of Contents
