Using At Local Mode Commands - AT&T 7506 User Manual

Using AT Local Mode Commands

The AT Local Mode provides an interface similar to that available on many popular modems. In
particular, the AT mode is appropriate when using a PC with communications software that uses
AT commands.
If you need to use AT Local Mode, you should have selected the ''AT'' option when you first set
the data options from your keypad. See Chapter 2, ''Getting Started,'' for information on setting
the option.
Suspending and Continuing Data Transmission
To suspend data transmission and return to AT mode, rapidly type:
+++ (default value)
The response is
OK
Data transmission has been suspended and you can now type AT commands.
To exit AT mode and return to data mode:
Type ato
The response is typically
CONNECT 9600
Changing Between AT Local Mode and Data Mode During a Data Call
3-8 Using the CMD and AT Commands
+++
At
Local
Mode
ATO
FIGURE 3-2
Data
Mode