Reverse Speed Safety Device - Flash 1107M Manual

GB
The two-wheel tractor is
devices to ensure maximum safety:
- Automatic PTO disengagement device. This is a
mechanical device that prevents shift into
speed when the PTO
configuration only).
- Engine shut-off. This
device (Diesel) that stops the engine as soon as the
handlebars are released.

REVERSE SPEED SAFETY DEVICE

The two-wheel tractor is provided with
adjusted safety device that prevents concurrent use
of reverse speed and attachment when the rotary
is fitted.
This device consists of a
stalled on the PTO control lever
Disengage the PTO before removing the pin (1) and
adjusting its position.
The placard illustrated in
of pin (1) as a function of the machine configuration.
- when the pin
Pin pulled out:
shown in the top half of fig. 3,
be engaged only after
chine in two-wheel tractor version).
- when
Pin pushed in:
trated in the bottom half of fig. 3, reverse speed
can be engaged also when the PTO is operating
(machine fitted with front-mounted attachments).
WARNING
It is mandatory to check that the safety pin is posi-
tioned as required for the
ration (two-wheel tractor
ments).
The Manufacturer waives any responsibility arising
from the incorrect use of
SAFETY DEVICES
fitted with the following safety
reverse
is rotating (two-wheel tractor
is an electrical or mechanical
an operator-
pin (see fig. 3, item
(2).
detail A shows the position
is pulled out, as
reverse speed can
uncoupling the PTO (ma-
the pin is in the position illus-
selected operating configu-
or front-mounted attach-
the safety device.
tiller
1) in-