Identification Data; Two-Wheel Tractor Identification; Engine Identification - Flash 1107M Manual

GB
- in case of excessive vibrations (investigate cause
immediately).
• Stop the engine before adjusting attachments.
• Periodically check that all nuts and bolts are tight.
• Do not leave your two-wheel tractor in closed am-
bient with fuel in the
source of danger.
• Keep your two-wheel tractor clean. Do not let grass
and oil residues build up: these are a fire hazard.
• Fuel
is highly flammable.
cifically designed containers. Refuel your two- wheel
tractor in the open. Do not smoke while re- fueling.
• Complete refueling before starting
not remove the fuel cap or
is running or hot. In case of
start the engine. Push
distance away from where the spillage occurred
before starting it.
• Replace the exhaust pipe if it becomes worn or
damaged.

IDENTIFICATION DATA

TWO-WHEEL TRACTOR IDENTIFICATION

The serial number is stamped on the engine side of
the gear box of your two-wheel tractor (see fig. 1, item
1).

ENGINE IDENTIFICATION

Refer to the engine Operation and Maintenance Man-
ual.
EC MARKING
The two-wheel tractor is marked EC in compliance with
the Directive of the European Community Council
89/392/EEC and further amendments (see fig. 1, item 2).
The summary of the EC marking related to the
and Special models are indicated below.
1107F
tank. Fuel vapor is a potential
Store fuel only in spe-
the engine. Do
refuel when the engine
fuel spillage, do not
your two-wheel tractor some
1107M
5