Table of Contents
Advertisement
Available languages
Available languages
GB
CUTTER BAR MOWER TECHNICAL
SPECIFICATIONS
Sickle bar mowers
-
Drive: mechanical con-rod.
-
Cutting width: 95 cm, 110 cm, 127 cm.
E.S.M. mowers
-
Drive: mechanical con-rod.
-
Cutting width: 97 cm, 117 cm.
Special type bar mowers
-
Drive: mechanical con-rod.
-
Cutting width: 115 cm.
OPERATING CUTTER BAR MOWERS
The cutter bar attachment is driven via the PTO.
Operate the PTO control lever as follows:
a. Turn throttle control lever to idle
b. Pull up clutch lever and engage first speed with
gear lever.
c. Pull PTO control lever. Release the lever when
drive is engaged.
d. Release the clutch slowly to start mowing.
CAUTION
Release the clutch gradually; do not release
load
is applied to the
mower.
CUTTER BAR MOWER ADJUSTMENT
The cutter bar mower requires a number of adjust-
ments. The wear plate must be adjusted periodically
to ensure efficient
cutting.
The shoes can be adjusted to give the required cut-
ting height. The knife mechanism can also be ad-
justed
to minimize vibration and noise.
Wear plate adjustment
At regular intervals check the play between the wear
plate and the cutting knife.
Proceed as follows to reduce the gap if necessary.
SICKLE BAR MOWERS
a. Loosen the two screws
of the four wear plates
b. Loosen lock nut (5) and turn wear plate adjuster
screw
(4)
to obtain
the knife.
c. Tighten again the securing nut
(1)
and
(2).
E.S.M. MOWERS Type COMUNAL
a. Loosen the two nuts
wear
plates.
position.
it
(fig. 1)
(1)
and (2)
that
secure e- ach
(3).
correct
sliding movement of
(5)
and the screws
(fig.
2)
(1)
securing each of
the
b. Turn adjuster
correct knife movement.
c. Tighten again the two securing nuts (1).
MOWING BAR E.S.M. type S
The mowing bar type E.S.M. type S does not require
any special adjustment as
SPECIAL TYPE BAR MOWERS (fig. 3)
a. Loosen the two nuts (1) securing each of the four
wear plates
b. Turn adjuster nut
correct knife movement.
c. Tighten again the two securing nuts
when
four
nut
(2)
of each wear plate
NOTE
it
is self-adjusting.
(2).
(3)
of each wear plate
to
obtain
to
obtain
(1).
Advertisement
Table of Contents
