Table of Contents
Advertisement
Available languages
Available languages
GB
TECHNICAL SPECIFICATIONS
ENGINE
The
two-wheel
tractor may be
engines:
-
HONDA GC 160; 4 stroke gasoline;
3,7 kW
(5 HP);
160 cm
-
HONDA GX 160; 4 stroke
4 kW (5,5
HP);
163 cm
-
HONDA
GX
200; 4 stroke
4,8 kW
(6,5 HP);
198
-
LOMBARDINI 15
LD 315; 4 stroke Diesel;
5 kW (6,7
HP);
315 cm
•
-
YAMARA Iv1X200 4 stroke
HP) 192 cc
4.2
kw (5.7
STARTING
Rewind start device as
be fitted with electric starter upon
ELECTRIC STARTING
Upon
request,
two-wheel
electric starter with key control.
The
12 V battery has a capacity
28Ah.
CLUTCH
Multi
plate dry clutch with control lever on left han-
dlebar.
SPEEDS
Speeds are engaged
umn.
1107
Models
(2+2)
Two-wheels
tractor configuration: 2 forward speeds
and 1
reverse
speeds.
Configuration with front-mounted attachments: 2
ward speeds and 2
reverse
fitted
with
the
following
3
.
gasoline;
3
.
gasoline;
cm
3
.
3
.
gasoline
standard.
Some models may
request.
(upon
request)
tractors can be fitted with
(40
hours) equal to
through
a lever fitted to the col-
speeds.
Configuration with front-mounted attachments: 2 for-
ward
speeds and 2 reverse speeds.
When the machine is fitted with front-mounted at-
tachments, forward speeds become
and vice versa because of
motion. The maximum speed that can be attained in
the different speeds
TRANSMISSION
Mechanical
oil
DIFFERENTIAL GEAR
(Special versions)
It
can be actuated by a control lever fitted to the left
handlebar (locking/unlocking).
POWER TAKE OFF
Mounted
attachments are driven via an independent,
single speed
handlebars.
Maximum PTO speed:
COUPLING OF ATTACHMENTS
Coupling of attachments
through a quick change fitting
installation
and removal of the attachments, and does
not require
the
HANDLEBARS
Adjustable
in height and width.
through
180°
used.
for-
BRAKES (SPECIAL VERSIONS)
Mechanical
wheels,
applied
WHEELS/TYRES
-
Tyres
with agricultural tread.
-
Available
sizes:
4.00-8.
4.0-10
16X6.50-8.
-
Inflation pressure: 1.2
reversal
of the
is indicated
in the following table.
bath gear box type.
(PTO)
PTO
engaged by a control lever on the
943 rpm
(clockwise
to
the
PTO
that
provides
use of bolts, nuts or spanner.
Rotate
when
front-mounted
attachments are
controlled,
independent
by
leversi o1he
right
bar.
reverse
speeds
direction
of
rotation).
is obtained
for
fast
handlebars
on the two
handlebar.
Advertisement
Table of Contents
