Two-Wheel Tractor Controls; Operating The Controls - Flash 1107M Manual

GB

TWO-WHEEL TRACTOR CONTROLS

See fig. 4.
1. Clutch lever.
2. Engine stop lever.
3. Differential lock lever.
4. PTO control lever (Note
5. Handlebar vertical
6. Gear lever (Note 2).
7. 3rd speed preselection control
(versions 3+2).

OPERATING THE CONTROLS

Clutch lever
(See fig. 5)
- Lever (1) pulled up:
- Lever (1) released:
Engine stop lever
(See fig. 5)
- Lever (2) pressed down: engine
- Lever (2) released:
Differential lock lever
(Special versions)
You can lock the differential when operating on diffi-
cult terrain in order to obtain maximum traction.
Use the differential lock while
line only.
1).
lock release lever.
lever
clutch disengaged.
clutch engaged.
running.
engine stopped.
CAUTION
working in a straight
8. Throttle control lever.
9. R.H. brake lever (Special
L.H. brake lever (Special versions).
10.
PTO instant adaptor.
11.
When the machine
NOTE 1:
attachments,
lever.
When the machine
NOTE 2:
mounted attachments.
the PTO control lever.
To lock and unlock the differential proceed as
(see fig. 5):
a. To lock the differential,
tractor, and push the
ward.
b. To unlock the differential,
and pull the differential lock lever
A plate on the left handlebar
the use of the differential lock
versions).
is fitted with front- mounted
this lever becomes the gear
is fitted with front-
this lever becomes
slow down the two-wheel
differential lock lever
pull the clutch lever (1)
(3) backward.
(see detail A) illustrates
lever.
follows
(3) for-