Tools - NEC NP-PH1000U User Manual

TOOLS

ADMINISTRATOR MODE
This allows you to select MENU MODE, save settings, and set a password for the administrator mode.
MENU MODE
NOT SAVE SETTING
VALUES
NEW PASSWORD/
CONFIRM PASS-
WORD
NOTE:
When [LAST] is selected for [DEFAULT SOURCE SELECT], placing a check mark for [NOT SAVE SETTING VALUES] will forcibly
select NETWORK for source at every power-on time.
To avoid this, select [AUTO] for [DEFAULT SOURCE SELECT] before placing a check mark for [NOT SAVE SETTING VALUES].
TIP:
To return to the ADVANCED menu from the BASIC menu, do the following:
1. Use the SOURCE button on the cabinet or press the NETWORK button on the remote control to select
[NETWORK] to display the APPLICATION MENU.
2. Select [TOOLS] → [ADMINISTRATOR MODE] → [MENU MODE] → [ADVANCED MODE].
Select either [BASIC] or [ADVANCED] menu.
(→ page 97)
Placing a check mark will not save your projector settings�
Clear this check box to save your projector settings�
Assign a password for the administrator mode.
152
5. Using On-Screen Menu
—
—
Up to 10 alphanumeric
characters