List Of Tools Used - NEC NC3200S Installation Manual

1.5

List of Tools Used

The tools used for installing projector are as follows:
Item
Projector
(NC3200S/
NC3200S-A /
NC3240S-A)
Installation base
(NC-PD02)
Wide converter
lens turret
(NC-AT02)
Lens
Option Board
(NC-80MB01/
NC-80LB01/
NC-80DS01)
26
Tool
Phillips head screwdriver (No.2)
Flat head screwdriver
Hexagonal wrench (Width across flats: 4 mm)
Hexagonal wrench (Width across flats: 5 mm)
Spanner (Width across flats: 17 mm)
Spanner (Width across flats: 19 mm)
Box wrench (Width across flats: 17mm)
Phillips head screwdriver (No.2)
Phillips head screwdriver (No.3)
Hexagonal wrench (Width across flats: 3mm)
Hexagonal wrench (Width across flats: 4mm)
Hexagonal wrench (Width across flats: 14mm)
Spanner (Width across flats: 24mm)
Phillips head screwdriver (No.2)
Hexagonal wrench (Width across flats: 5mm)
Hexagonal wrench (Width across flats: 6mm)
Spanner (Width across flats: 10mm)
Hexagonal wrench (Width across flats: 2.5mm)
Phillips head screwdriver (No.2)
1. Before Setting Up Your Projector
Quantity Major Application
1 Covers
1 Lens
1 Lamp Bulb
1 Lamp house
2 Power cable
1 Level adjuster
1 Lamp house
1 Covers
1 Lamp power supply
1 Outer panel
1 Holder foot
1 Tilt metal
1 Level adjuster
1 -
1 Front bracket, Lens
holder
1 Shaft L/R
1 Adjust stopper bolt
1 Lens adaptor
1 -