NEC NP-PH1000U User Manual page 39

Adjusting with the remote control
1. Press the LENS SHIFT button.
The Lens Shift screen will be displayed.
2. Press the ▼▲◀ or ▶ button.
Use the ▼▲◀▶ buttons to move the projected image.
TIP:
• The diagram below shows the lens shift adjustment range for the desktop front. To raise the projection position higher than this,
use the tilt feet. (→ page 22)
2. Projecting an Image (Basic Operation)
Width of projected image
0.55V
1V
0.4V
0.2H
25
Height of projected image
1H
0.2H