NEC NP-PH1000U User Manual page 71

• NAME
PROJECTOR NAME
HOST NAME
DOMAIN NAME
• ALERT MAIL
ALERT MAIL
SENDER'S ADDRESS
SMTP SERVER NAME
RECIPIENT'S ADDRESS
1, 2, 3
TEST MAIL
SAVE
Enter a name for your projector so that your computer can identify the projector. A
projector name must be 16 characters or less.
TIP: Projector name will not be affected even when [RESET] is done from the menu.
Enter the hostname of the network connected to the projector. A host name must be
15 or less.
Enter the domain name of the network connected to the projector. A domain name
must be 60 characters or less.
This option will notify your computer of lamp replace time or error messages via e-mail
when using wireless or wired LAN.
Placing a checkmark will turn on the Alert Mail feature.
Clearing a checkmark will turn off the Alert Mail feature.
Sample of a message to be sent from the projector:
The lamp and filters are at the end of its usable life. Please replace the lamp.
Projector Name: XXXXX
Lamp 1 Hours Used: XXX [H]
Lamp 2 Hours Used: XXX [H]
Enter sender's address.
Enter the SMTP server name to be connected to the projector.
Enter your recipient's address. Up to three addresses can be entered.
Send a test mail to check whether your settings are correct or not
NOTE:
• If you execute a test, you may not receive an Alert mail. Should this happen, check if network
settings are correct.
• If you entered an incorrect address in a test, you may not receive an Alert mail. Should this
happen, check if the Recipient's Address is correct.
Click this button to save your settings to the projector's memory.
57
3. Convenient Features