[Tools] - NEC NP2000 User Manual

6. Using On-Screen Menu

[Tools]

Selecting the ChalkBoard [ChalkBoard]
This option displays the ChalkBoard tool bar.
The ChalkBoard feature allows you to write and draw messages on a projected image. (→ page 44)
NOTE: The ChalkBoard feature is available only when a USB mouse is used.
Using Off Timer [Off Timer]
1. Select your desired time between 30 minutes and 16 hours: Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2. Select [OK] and press the ENTER button on the remote control.
3. The remaining time starts counting down.
4. The projector will turn off after the countdown is complete.
NOTE:
• To cancel the preset time, set [Off] for the preset time or turn off the power.
• When the remaining time reaches 3 minutes before the projector is turned off, the [The projector will turn off within 3 minutes]
message will be displayed on the bottom of the screen.
Using Program Timer [Program Timer]
This option turns on or off the projector automatically at a specified time.
Up to 14 different timer settings can be programmed.
99