NEC NP-PH1000U User Manual page 152

DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
WNS CONFIGURA-
TION
AUTO DNS
DNS CONFIGURA-
TION
ADVANCED*
RECONNECT
* The [ADVANCED] setting screen is available for [WIRELESS LAN] only.
NOTE:
• If you select [EASY CONNECTION] from [PROFILES], you cannot make settings to DHCP and its following items except [CHAN-
NEL] in [ADVANCED].
Advanced Settings (settings only required when using a separately sold wireless LAN unit)
(ADVANCED menu only)
• When selecting [WPS], the network will be connected by using
settings stored automatically with the WPS function.
Selecting [WPS] will allow the projector to access the network
by using the settings the WPS function automatically stored.
Place a check mark to automatically assign an IP address to the
projector from your DHCP server.
Clear this check box to register the IP address or subnet mask
number obtained from your network administrator.
Set your IP address of the network connected to the projector
when [DHCP] is turned off.
Set your subnet mask number of the network connected to the
projector when [DHCP] is turned off.
Set the default gateway of the network connected to the projector
when [DHCP] is turned off.
Set the IP address of your WINS server of the network connected
to the projector when [DHCP] is turned off.
Place a check mark to automatically assign the IP address of your
DNS server connected to the projector from your DHCP server.
Clear this check box to set the IP address of your DNS server
connected to the projector.
Set the IP address of your DNS server on the network connected
to the projector when [AUTO DNS] is cleared.
This menu allows you to set various items for your wireless LAN
connection (network type, security).
Retry to connect the projector to a network. Try this if you have
changed [PROFILES].
138
5. Using On-Screen Menu
—
Up to 12 numeric
characters
Up to 12 numeric
characters
Up to 12 numeric
characters
Up to 12 numeric
characters
Up to 12 numeric
characters
Up to 12 numeric
characters
—
—