NEC NP-PH1000U User Manual page 194
11,000-lumen professional installation projector
Hide thumbs
Also See for NP-PH1000U:
- Manual (58 pages) ,
- Installation manual (12 pages) ,
- Quick setup manual (6 pages)
Table of Contents
Advertisement
To replace the lamp:
1. Remove the lamp cover.
(1)Loosen the two lamp cover screws.
• The lamp cover screw is not removable.
(2)Pull the lamp cover towards you and remove it.
2. Remove the lamp housing.
(1)Loosen the three screws securing the lamp housing until the phillips screwdriver goes into a freewheeling condi-
tion.
• The three screws are not removable.
• Do not touch the exhaust fan power connectors.
(2)Remove the lamp housing by holding it.
CAUTION:
Make sure that the lamp housing is cool enough to handle before removing it.
Exhaust fan power
connector
180
7. Maintenance
Handle
Advertisement
Table of Contents
