To Remove The Wireless Lan Unit - NEC NP-PH1000U User Manual
11,000-lumen professional installation projector
Hide thumbs
Also See for NP-PH1000U:
- Manual (58 pages) ,
- Installation manual (12 pages) ,
- Quick setup manual (6 pages)
Table of Contents
Advertisement
To remove the wireless LAN unit
1. Press the
button to set the projector to the standby mode, then
turn off the main power switch.
2. Remove the anti-theft cap.
Loosen the screw and remove the anti-theft cap for the Wireless LAN
Unit.
3. Pull out the Wireless LAN Unit from the USB (LAN) port.
NOTE:
If the wireless LAN unit is not to be used for an extended period of time, put the
plate back and secure it with the two screws.
6. Installation and Connections
170
Advertisement
Table of Contents
