Connecting The Projector To A Lan - NEC NP-PH1000U User Manual

• Projected images can be transferred and saved to computers.
When "Meeting Mode" is used, projected images can be sent to the computers of all the participants (attendants)
of a "Meeting". The received images can be saved to your computer with a memo (text data) attached.
Attendant
• 1-click switching of presenter
When switching to another presenter during the conference, the participants (attendants) can simply click a button
to switch over to the new presenter.
• Central management of the projecting computer
Using the Training Mode allows you to use a single computer (Manager) to manage which computer (Attendant)
projects. Possible operation includes switching projecting computers to project from, as well as temporarily termi-
nating communication with the projector.
Attendant A
NOTE:
The Training Mode is not installed via the "Typical" installation option when Image Express Utility 2.0 is installed.
To use Training Mode, select "Extension" installation option on the install selection screen that is displayed while Image Express
Utility 2.0 installation is in progress, and select "Training Mode (Attendant)" or "Training Mode (Manager)".

Connecting the projector to a LAN

Connect the projector to the LAN by following the instructions in "Connecting to a Wired LAN" (→ page 167), "Con-
necting to a Wireless LAN" (→ page 168) and "9 Application Menus - NETWORK SETTINGS" (→ page 136)
Attendant
Attendant
Manager
Attendant B Attendant C
Presenter
Mr� D, please start
your presentation�
Attendant D
(presenter)
189
8. User Supportware