Tools; Mouse; Program Timer - NEC P502WL-2 User Manual

8. TOOLS

8-1. MOUSE

When this device is connected to a USB mouse sold commercially, the menu can be operated using the mouse.
The configuration of the mouse is as follows:
Item Description
Mouse If a check mark is marked, it enables to use the mouse con-
nected with the projector from the next booting up.
Button setting Switch the functions of the left and right buttons on the
mouse.
Speed setting Select the pointer speed reflecting mouse motion among
three levels.

8-2. PROGRAM TIMER

By setting day and time onto the projector, it enables the projector to automatically switch the power, the condition of
standby, the video signal and the condition of ECO mode. As an example based on the above, every Sunday projector
is powered on at 9 AM, is switched to the computer display at 9:03 and is gone into the Standby condition at 17:30.
NOTE:
• Before using [PROGRAM TIMER], make sure that the [DATE AND TIME] feature is set. (→ page 35)
Make sure that the projector is in the standby condition with the POWER cord connected.
If the projector leaves for over two weeks without the power supply, the set date and time will be reset to the factory default
setting and the program timer function will become ineffective. When the program timer function becomes ineffective, set "Date
and time" again.
* For utilizing the program timer, set [NETWORK STANDBY] for [STANDBY MODE].
Setting a new program timer
1. On the PROGRAM TIMER screen, use the ▲ or ▼ button to select [EDIT] and press the ENTER button.
The [PROGRAM LIST] screen will be displayed.
2. Focus on a blank program number and press the ENTER button.
The [EDIT] screen will be displayed.
32
Remarks