System Agent (Sa) Configuration; Pch-Io Configuration - Siemens SIMATIC IPC MD-34A Operating Instructions Manual

Firmware/BIOS description
7.2 Configure firmware
Firmware setting
Step(tm)
Intel(R) Speed
Shift Technology
Turbo Mode
C state
7.2.2.2

System Agent (SA) Configuration

You can configure System Agent parameters here.
Calling "System Agent (SA) Configuration"
Select: "Setup Utility (Page 71)" > "Advanced" > "System Agent (SA) Configuration".
Firmware setting
VT-d
VT-d
7.2.2.3

PCH-IO Configuration

You can configure USB settings here.
Calling "PCH-IO Configuration"
Select: "Setup Utility (Page 71)" > "Advanced" > "PCH-IO Configuration".
Firmware setting
USB Port Disable
Override
The following options show only when "USB Port Disbale Override" = "Select Per-Pin".
TYPE A USB 3.0
TYPE USB 3.0 AND
SD CARD
TYPE C USB 2.0
74
Value Setting in delivery
state
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Value Setting in delivery
state
Supported
Disabled
Enabled
Value Setting in delivery
state
Disable
Select Per-Pin
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Meaning
es to be supported.
x
Enabling Intel(R) Speed Shift Tech-
nology will expose the CPPC v2 inter-
x
face to allow hardware-controlled P-
state.
x This configuration is unavailable if
Intel(R) SpeedStep(tm) is disabled.
Enabling it to allow CPU to go to C
state when it's not fully utilized.
x
Meaning
Intel® VT-d (Virtualization Technology
for Directed I/O) can help you improve
security and reliability of the system
x
and improve performance of I/O de-
vices in virtualized environment.
Meaning
x Enable or disable the corresponding
USB port to report a Device Connec-
tion to the controller.
Enable or disable USB port. Once the
port is disabled, any USB devices
plugging into the port will not be
detected by BIOS or OS.
Operating Instructions, 08/2023, A5E52427535-AA
MD-34A