Main" Tab - Siemens SIMATIC IPC MD-34A Operating Instructions Manual

Firmware/BIOS description
7.2 Configure firmware
Key
[↑] [↓]
<Esc>
7.2.1

"Main" tab

Calling "Main" tab
Select: "Setup Utility (Page 71)" > "Main".
Device information
You can find important device information in the "Main" windows.
Device information
BIOS Version
Processor Type
System Bus Speed
System Memory Speed
Cache RAM
Total Memory
Controller0 Channel0
SODIMMO
Platform Configuration
CPUID
CPU Speed
CPU Stepping
Number of processors
Microcode Rev
GT info
SMX/TXT
PCH Rev/SKU
GOP Ver
Intel ME Version/SKU
LAN PHY Revision
Calling "Language"
You can select the supported display language for BIOS.
72
Function
Navigate to a submenu or a firmware setting. Confirm your selection with the
<Enter> key.
A submenu or tab or the Setup Utility is exited. If the Setup Utility is closed after
the confirmation prompt, changes to the firmware settings are discarded.
Explanation
Current firmware version
CPU type
Total L2 cache size
Total memory size
Microcode Revision
Version of Graphic Output Protocol (GOP) driver
Operating Instructions, 08/2023, A5E52427535-AA
MD-34A