Status Displays - Siemens SIMATIC IPC MD-34A Operating Instructions Manual

Product description
1.3 External design of the device
The following table describes the different functions of the keys:
Key
F1
F2
You can change the key assignment using the Programming function keys (Page 53),
1
"Settings > F1" menu.
To use this function, you must first disable the Barcode function in TotTab (Page 53).
2
1.3.2.3

Status displays

The status displays are located on the front of the device, see Exterior design (Page 10)
section.
System status displays
The system status displays indicate various operating states.
Icon
14
Function in "POST"
phase
(before Windows boots
up)
Opening the Recovery
menu
Calling the BIOS setup
screen
Meaning Colors
Rechargea- Orange
ble battery
Green
Red illuminat-
ed
Red flashing
Off
ON/OFF Blue
Off
Light Sensor Always white
Default Function in "WIN" phase
(after Windows boots up)
Short press
Start the Web browser
1
None (For devices without barcode
reader)
Start the Barcode reader
1, 2
devices with barcode reader)
Meaning of colors
Power supply unit is connected. Battery is being
charged.
Power supply unit is connected. Battery is charged.
Less than 10% battery remaining
Battery being swapped during the tablet in operation
No battery available
Tablet is ON.
Tablet is OFF.
Sensing the ambient brightness; the default setting is
Auto; it will adjust the LCD brightness automatically.
Operating Instructions, 08/2023, A5E52427535-AA
Long Press
Touch Mode
Make volume mute
(For
2
MD-34A