Safety Guidelines For Transport - Siemens SIMATIC IPC MD-34A Operating Instructions Manual

Safety notes

2.5 Safety guidelines for transport

• Do not place any objects and avoid exerting excessive force on the display, as this could
break the glass.
• Never touch the screen surface with a ballpoint pen, pencil, or any other sharp or metallic
object, as this could scratch the display.
Use your finger or a stylus to make inputs on the display.
• To maximize the service life of the backlight, set automatic turn off in the energy
management options. Do not use screen savers or any other software that impede energy
management.
Radiofrequency radiation
Immunity to radiofrequency radiation
The device has an increased immunity to radio frequency (RF) radiation in accordance with
the specifications for electromagnetic compatibility in the technical specifications.
RF radiation, e g. from a cell phone, may result in malfunctioning of the device. Persons may
be injured and the plant damaged.
• Avoid RF radiation.
• Remove radiation sources from the environment of the device.
• Switch off radiating devices.
• Reduce the radio output of radiating devices.
• Observe the information regarding electromagnetic compatibility.
• Observe the information in the technical specifications.
2.5 Safety guidelines for transport
Before you set off
Observe the following information when you are traveling with the device:
• Save important data from the SSD drive.
• For safety reasons, switch off the radio component (WLAN) if you cannot be sure that the
transmitted radio waves will not interfere with any electrical or electronic equipment in
your vicinity.
• Disconnect the peripheral devices from the device.
20
CAUTION
Operating Instructions, 08/2023, A5E52427535-AA
MD-34A