Operating Range For The Remote Control - NEC MultiSync P402 User Manual

PIP (Picture In Picture) button
ON/OFF button: Toggle switches between PIP, POP,
PICTURE BY PICTURE-ASPECT and PICTURE BY
PICTURE-FULL. See page 22.
INPUT button: Selects the "picture in picture" input signal.
CHANGE button: Replaces to the main picture and sub
picture.
DVI DVI DPORT DPORT VGA VGA RGB/HV HDMI RGB/HV
DVI DVI No No Yes Yes Yes Yes Yes Yes
DPORT DPORT Yes Yes No No Yes Yes Yes Yes
VGA VGA Yes Yes Yes Yes No No No No
RGB/HV RGB/HV Yes Yes Yes Yes No No No No
HDMI HDMI No No Yes Yes Yes Yes Yes Yes
DVD/HD DVD/HD Yes Yes Yes Yes Yes Yes No No
SCART SCART Yes Yes Yes Yes Yes Yes No No
VIDEO1 VIDEO1 Yes Yes Yes Yes Yes Yes Yes Yes
VIDEO2 VIDEO2 Yes Yes Yes Yes Yes Yes No No
S-VIDEO S-VIDEO Yes Yes Yes Yes Yes Yes Yes Yes
REMOTE ID button
Activates REMOTE ID function.
MTS button* 2
AUDIO INPUT button
Selects audio input source [IN1], [IN2], [IN3], [HDMI],
1
[OPTION]* .
button
Activates closed captioning.
Note: VIDEO1, VIDEO2, S-VIDEO inputs only.
*1: The product you purchased may not have this feature.
*2: This button's action depends on which option board you use.
Refer to the option board's manual for further information.
Sub picture
HDMI DVD/HD DVD/HD SCART SCART VIDEO1 VIDEO1 VIDEO2 VIDEO2 S-VIDEO S-VIDEO
No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Yes Yes No No No No Yes Yes No No Yes Yes
No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Yes Yes No No No No Yes Yes No No Yes Yes
Yes Yes No No No No No No No No No No
Yes Yes Yes Yes No No No No No No No No
Yes Yes No No No No No No No No No No
Yes Yes Yes Yes No No No No No No No No
English-11
Operating Range for the Remote
Control
Point the top of the remote control toward the LCD monitor's
remote sensor during button operation.
Use the remote control within a distance of about 7 m (23 ft.)
from remote control sensor or at a horizontal and vertical
angle of within 30° within a distance of about 3.5 m (10 ft.).
Caution: Important, the remote control
system may not function
when direct sunlight or strong
illumination strikes the remote
control sensor or when there is
an object in the path.
Handling the remote control
• Do not subject to strong shock.
• Do not allow water or other liquid to splash
the remote control. If the remote control gets
wet, wipe it dry immediately.
• Avoid exposure to heat and steam.
• Other than to install the batteries, do not open the remote
control.