5. Attach the cable cover
Use two of the M4 screws (included) to attach the cable
6. Switch on the power of all the attached
When connected with a computer, switch on the power of the
computer ﬁ rst.
7. Operate the attached external equipment
Display the signal from the desired input source.
8. Adjust the sound
Make volume adjustments when required.
9. Adjust the screen (See pages 20 and 21)
Make adjustments of the screen display position when
10. Adjust the image (See page 20)
Make adjustments such as backlight or contrast when
11. Recommended Adjustments
To reduce the risk of the "Image Persistence", please adjust
the following items based on the application being used:
"SCREEN SAVER", "SIDE BORDER COLOR" (See page 24)
"DATE & TIME", "SCHEDULE SETTINGS" (See page 21).
It is recommended that the "FAN CONTROL" setting
(See page 24) be turned to ON also.