Connections; Wiring Diagram - NEC MultiSync P402 User Manual

Connections

NOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in a
loss of the monitor image.
NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.
Before making connections:
* First turn off the power of all the attached equipment and make connections.
* Refer to the user manual included with each separate piece of equipment.

Wiring Diagram

Second monitor*
Computer (Digital)
*: Multiple monitors that are daisy-chained have a limit to the connectable monitors.
NOTE: Solid lines = video signal. Dotted lines = audio signal.
Connected Connecting
equipment terminal
DVI (DVI-D)
HDMI
5BNC+VIDEO
AV VIDEO1 (BNC)
S-VIDEO
VIDEO2 (5BNC)
DVD/HD (5BNC)
VGA (D-Sub)
DVI (DVI-D)
PC RGB/HV (5BNC)
DisplayPort
HDMI
*1: depend on signal type.
• AUDIO IN 1, 2 and 3 can be used for audio input. To select audio source [IN1], [IN2] or [IN3] in AUDIO INPUT in OSD menu
or press the AUDIO INPUT button (remote control).
Computer (Analog)
DVD player
with HDMI out
Setting in Terminal Mode
DVI MODE: DVI-HD
1
RAW/EXPAND*
BNC MODE: SCART
-
-
BNC MODE: VIDEO
BNC MODE: COMPONENT
-
DVI MODE: DVI-PC
BNC MODE: RGB
-
RAW/EXPAND* 1
English-14
DVD player with
SCART OUT
VCR or
DVD Player
Connecting
Input signal name
Audio terminal
DVI AUDIO IN1, IN2, IN3
HDMI
SCART AUDIO IN1, IN2, IN3
VIDEO1 AUDIO IN1, IN2, IN3
S-VIDEO AUDIO IN1, IN2, IN3
VIDEO2 AUDIO IN1, IN2, IN3
DVD/HD AUDIO IN1, IN2, IN3
VGA AUDIO IN1, IN2, IN3
DVI AUDIO IN1, IN2, IN3
RGB/HV AUDIO IN1, IN2, IN3
DPORT
HDMI
Stereo Amplifi er
DVD player
Input button
in remote control
DVI
HDMI HDMI
DVD/HD
VIDEO
S-VIDEO
VIDEO
DVD/HD
VGA
DVI
RGB/HV
- DISPLAYPORT
HDMI HDMI