FLOJET 4325 Series Manual

FEATURES

• Self-Priming
• Dry Running
• Soft, Noise Absorbing Mounts
• Corrosion Resistant Materials
• Models Meet U.S.C.G. Electric Standards
• Thermally Protected
• A.C. Models Have 6' Power Cord

SPECIFICATIONS

Motor: Permanent Magnet, Ball Bearings at Front &
Rear Endbell. CE Models are fully suppressed.
Pump: Four chamber positive displacement
diaphragm design; Self-priming up to 10 ft.
suction lift; Pump able to run dry without
damage; Removable port to hose connectors.
(Available on 12 & 24V d.c. Models and 230V a.c. Model)
MODEL VOLTS
4325-143A 12V dc
4325-143L 12V dc
4325-343A 24V dc
4325-343L 24V dc
4325-443A 32V dc
4325-043A 115V ac
4325-243A 230V ac
* CE fully suppressed models are identified by a prefix "R" and a CE mark on the label. (i.e. R4325-143L).
Self Declaration Of Conformance (SDOC) is available upon request.

OPERATION

With pump intake connected to supply tank or through
hull fitting, and operation switch off, open outlet valve,
then turn pump switch on. Water will begin to flow, when
water is free of air turn valve off. When valve is shut off
pump will stop. Should pump fail to stop, turn switch off
and see the trouble shooting guide.
AMP DRAW
@ 10 psi (0.7 bar) GPM (1/min)
6.0
6.0
2.5
2.5
2.0
0.5
0.3
"Quad II Diaphragm"
Automatic Washdown Pump
Pump Series Dimensions - Inches (mm)
Height
4325-XXX 3.75 (95) 6.3 (160)
FLOW PRESSURE SWITCH
MAX psi (bar)
4.5 (17) 40 (2.8)
4.5 (17) 40 (2.8)
4.5 (17) 40 (2.8)
4.5 (17) 40 (2.8)
4.5 (17) 40 (2.8)
4.5 (17) 40 (2.8)
4.5 (17) 40 (2.8)
For portable use we recommend the pump be mounted
on a base (i.e. 3/4" x 8" x 10" board or plywood), add a
length of cable with alligator clips for battery connection
or plug the 1 15V ac and 230V ac Models into a G.F.I.
protected electrical outlet.
Models4325 Series
Width Length
9.9 (252)
PRESSURE
STRAINER NOZZLE
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Weight
lb. (kg)
6.0(2.8)
No
Yes
No
Yes
No
No
No