Advertisement
Quick Links
FEATURES
• Self-Priming
• Dry Running
• Soft, Noise Absorbing Mounts
• Corrosion Resistant Materials
• Models Meet U.S.C.G. Electric Standards
SPECIFICATIONS
Motor: Permanent Magnet, Ball Bearing, O-Ring
sealed. CE Models are fully suppressed.
Pump: Four chamber positive displacement
diaphragm design; Self-priming up to 6 ft.
suction lift; Pump able to run dry without,
damage; Removable port to hose connectors.
MODEL*
4105-143
4105-343
* CE fully suppressed models are identified by a prefix "R" and a CE mark on the label. (i.e. R4105-343).
Self Declaration Of Conformance (SDOC) is available upon request.
OPERATION
Your "Quad II" pump is designed to self-prime up to 6
feet suction lift (vertical distance from shower pan to
pump inlet). This pump is quiet running. It is
recommended you utilize a "lighted" on-off switch
VOLTS
12V dc
24V dc
"Quad II Diaphragm"
Shower Drain/R.O. Feeder Pump
Pump Series
Dimensions - Inches (mm)
Height
4105-XXX
3.75 (95) 6.3 (160)
AMP DRAW
@ 10 psi (0.7 bar)
3.6
1.8
so that the pump is turned off when not in use. the
"Quad II" is able to run dry (no liquid) for extended
periods with no damage to the pump. However, this
could cause needless battery drain.
Models4105 Series
Width
Length
8.2 (208) 3.9 (1.8)
FLOW
GPM (1/min)
3.3 (12.5)
3.3 (12.5)
Weight
lb. (kg)
Advertisement
Related Manuals for FLOJET 4105 Series
Summary of Contents for FLOJET 4105 Series
- Page 1 “Quad II Diaphragm” Models4105 Series Shower Drain/R.O. Feeder Pump FEATURES • Self-Priming • Dry Running • Soft, Noise Absorbing Mounts • Corrosion Resistant Materials • Models Meet U.S.C.G. Electric Standards SPECIFICATIONS Motor: Permanent Magnet, Ball Bearing, O-Ring sealed. CE Models are fully suppressed. Pump: Four chamber positive displacement diaphragm design;...
- Page 2 INSTALLATION STEP I motor up, attach motor mounts first then pump head Remove shipping plugs from Quad pump ports. Some mounts, while supporting weight of pump. water from factory testing may spill out STEP 5 STEP 2 Use 1/2” I.D. flexible hose (preferably braided or Install inlet A and discharge, B port connectors.
- Page 3 • Pump circuit has no power • Defective motor Quite often when a pump is worn or defective the one failed component has overburdened others. To avoid frequent aggravating repairs, Flojet offers service kit assemblies making repairs as quick and easy as possible. DISASSEMBLE REASSEMBLE...
- Page 4 40 Mesh WARRANTY RETURN PROCEDURE FLOJET warrants this product to be free of defects in material Prior to returning any product to FLOJET, call customer service for and/or workmanship for a period of one year after purchase by the an authorization number. This number must be written on the customer from FLOJET.
Need help?
Do you have a question about the 4105 Series and is the answer not in the manual?
Questions and answers